Archive for 13/02/2011
SolidCAM Tutorials
13/02/2011
6 comments
Hiện nay trang www.solidcam.com đã không còn cho download những tài liệu học tập dạng pdf mà thay vào đó là những video hướng dẫn thực hành. Phía trên là 1 video minh họa. Các bạn có thể vào trang http://www.solidcam.com/index.php?id=304 để xem toàn bộ các video hướng dẫn này cũng như load các những bài tập để về thực hành.
Trong thời gian sắp tới tôi sẽ up tất cả những hướng dẫn thực hành SolidCAM 2009 dạng pdf để các bạn tiếp tục tham khảo
Categories: Tutorials
SolidCAM 2010 SP3 (32bit & 64bit)
13/02/2011
5 comments
System Requirement :
- Name: SolidCAM 2010
- Version: SP3.0 HF1 32bit / 64bit
- Creator: http://www.solidcam.com
- Interface: english, russian
- OS: Windows XP / Vista / Seven
- Platform: SolidWorks 2007-2011 32bit / 64bit
- Size: 1.12 Gb
Download
Categories: Software
MasterCAM X3
13/02/2011
Leave a comment
System Requirements :
Processor
- 2.5 GHz Intel Pentium 4 (or equivalent) minimum
- 32-bit or 64-bit Intel®-compatible processor
Note: The processor must be SSE2-compatible. Intel-compatible processors manufactured since 2003 should be SSE2-compatible.
Operating System
- Windows XP, Windows Vista® (Business or Ultimate), or Windows 7 (Professional or Ultimate) including the latest service packs and recommended updates
Memory
- 2 GB minimum
- Additional RAM recommended for optimal performance
Graphics Configuration
- 256MB OpenGL-compatible graphics card (minimum)
- Professional-level graphics card designed for CAD/CAM applications required, NVidia Quadro or AMD FirePro series recommended
- Integrated graphics controllers are not supported
- 1280 x 1024 pixel resolution (minimum)
- Full hardware acceleration display setting is recommended
Hard Disk Drive Space
- 3 GB available hard disk space (minimum)
Mouse
- 2-button (minimum)
- 3-button or 2-button with middle mouse wheel (recommended)
Network Protocol
- (NetHASP users only) TCP/IP protocol for NetHASP installation
Additional Supported Hardware
- Dual monitors
- Multi-core processors (one or more processor per instance of Mastercam)
- SpaceBall® motion controllers
Additional Software
- You will need the latest version of Adobe® Flash® to view the videos that accompany Mastercam.
- You will need Adobe® Reader® 6.0 (minimum) to display the PDF documentation.
- You can download both applications from http://www.adobe.com.
Download
Categories: Software
MoldWorks + SplitWorks 2009
13/02/2011
4 comments
System requierments :
- SolidWorks Version 2009
- Operating System (for MoldWorks) MS Windows XP / Vista – 32 & 64bit
- Graphics 1024×768 resolution with minimum 32768 colours
- Disk Space 5GB free
- Memory 1GB + RAM (2GB recommended)
Download
Categories: Software